Petrochemicals

Tetrax (Polyisobutylene)

Polyisobutylene is composed of long-chain hydrocarbon formed by polymerization of isobutene, and is extremely stable under normal conditions. It is transparent non-noxious high-consistency semi-solid polymer free of impurities.

Packaging Carton Box (20kg)
Main Application Adhesive, sealant, asphalt improvement material, lubricant improver, electrical insulating material, special pigment

Grade3T Typical properties

Item   Units Representative Values Test method
Viscosity Average Molecular Weight - 30,000 JXE method
Density at 15℃ g/cm3 0.92 JIS K 2249
Refractive Index N20/D 1.508 JIS C 2101
Appearance - Clear from suspended matter JIS C 2101
Loss by Evaporation mass% Not more than 0.5 JXE method
Kinematic Viscosity at 200℃ mm2/s 6,500 JXE method
GPC Mw - 49,000 JXE method
Industrial Safety and Health Law Enforcement Ordinance 18-2, Appendix 9 Hazardous Materials Requiring Notification - N/A -
PRTR Type 1 - N/A -
PRTR Type 2 - N/A -
Chemical Substance Number - (6)-774 -
CAS.NO. - 9003-27-4 -
UN No. - N/A -

Grade4T Typical properties

Item   Units Representative Values Test method
Viscosity Average Molecular Weight - 40,000 JXE method
Density at 15℃ g/cm3 0.92 JIS K 2249
Refractive Index N20/D 1.508 JIS C 2101
Appearance - Clear from suspended matter JIS C 2101
Loss by Evaporation mass% Not more than 0.5 JXE method
Kinematic Viscosity at 200℃ mm2/s 16,500 JXE method
GPC Mw - 59,000 JXE method
Industrial Safety and Health Law Enforcement Ordinance 18-2, Appendix 9 Hazardous Materials Requiring Notification - N/A -
PRTR Type 1 - N/A -
PRTR Type 2 - N/A -
Chemical Substance Number - (6)-774 -
CAS.NO. - 9003-27-4 -
UN No. - N/A -

Grade5T Typical properties

Item   Units Representative Values Test method
Viscosity Average Molecular Weight - 50,000 JXE method
Density at 15℃ g/cm3 0.92 JIS K 2249
Refractive Index N20/D 1.508 JIS C 2101
Appearance - Clear from suspended matter JIS C 2101
Loss by Evaporation mass% Not more than 0.5 JXE method
Kinematic Viscosity at 200℃ mm2/s 30,500 JXE method
GPC Mw - 69,000 JXE method
Industrial Safety and Health Law Enforcement Ordinance 18-2, Appendix 9 Hazardous Materials Requiring Notification - N/A -
PRTR Type 1 - N/A -
PRTR Type 2 - N/A -
Chemical Substance Number - (6)-774 -
CAS.NO. - 9003-27-4 -
UN No. - N/A -

Grade6T Typical properties

Item   Units Representative Values Test method
Viscosity Average Molecular Weight - 60,000 JXE method
Density at 15℃ g/cm3 0.92 JIS K 2249
Refractive Index N20/D 1.508 JIS C 2101
Appearance - Clear from suspended matter JIS C 2101
Loss by Evaporation mass% Not more than 0.5 JXE method
Kinematic Viscosity at 200℃ mm2/s 50,500 JXE method
GPC Mw - 80,000 JXE method
Industrial Safety and Health Law Enforcement Ordinance 18-2, Appendix 9 Hazardous Materials Requiring Notification - N/A -
PRTR Type 1 - N/A -
PRTR Type 2 - N/A -
Chemical Substance Number - (6)-774 -
CAS.NO. - 9003-27-4 -
UN No. - N/A -

SDS

Please use our safety data sheet (SDS)for your reference. In addition, in order to distinguish from SDS by formal delivery, it is described as "for viewing" on the title.
In addition to the title change, the SDS for viewing has omitted the information on the department in charge and the emergency contact information, but the other notation is the same as SDS by formal delivery.
The formal delivery method of SDS is in principle handed down directly from the seller. Customers purchased from our dealers or distributors will obtain official SDS, so we ask you to order to the seller.

Inquiries

Esso and Mobil are trademarks of Exxon Mobil Corporation, used under license.